Upgrade your
suspension!
For better, safer, predictable handling
149.99- 1989-95 SHO NOS Ford-Motorcraft- HD Front Strut Set
(2)
1989-95 Taurus/SHO/Sable
Includes two new front struts with new boots and bumpers!
Made in USA
Genuine NOS Ford-Motorcraft parts!
69.99- MOOG Front Left Lower Control Arm
1989-95
Taurus/SHO/Sable
Heavy-Duty SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95
Taurus/Sable.
Includes new ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut,
and new rear tension
strut rod nut.
Integral ball joint has angled grease fitting.
New OE-type pressed-in LCA-to-subframe and LCA-to-tension
strut rod bushings.
Made in USA
Never install the lighter-duty Taurus/Sable LCAs on your SHO!
(Some parts store listings are incorrect)
We'll install
the ball joint boots and grease fittings for you!
69.99- MOOG Front Right Lower Control Arm
1989-95
Taurus/SHO/Sable
Heavy-Duty SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95
Taurus/Sable.
Includes new ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut,
and new rear tension
strut rod nut.
Integral ball joint has angled grease fitting.
New OE-type pressed-in LCA-to-subframe and LCA-to-tension
strut rod bushings.
Made in USA
Never install the lighter-duty Taurus/Sable LCAs on your SHO!
(Some parts store listings are incorrect)
We'll install
the ball joint boots and grease fittings for you!
299.99- 1989-95 Ford HD subframe mount set
Greatly
improved design!
Genuine Ford OEM parts
Far superior to "Police" subframe mounts,
without the increased NVH (noise-vibration-harshness)
of solid aluminum mounts.
Set of (4)
Made in USA (OEM Ford)
18.99- 1989-95 FORD subframe mount recall kit
Includes:
(2) subframe bolts
(2) HD improved captive nuts
(2) HD plate
washers (not used with our HD bushings above)
(2) hole plugs (to plug top access holes for replacing captive nuts)
Detailed
instructions
Designed for rear subframe mounts, but hardware can be used at front mounts also
Made in USA (OEM Ford)
11.99- 1989-95 FORD subframe mount bolts
Galvanized steel
Metric 10.9 hardness
Also great for mounting 3.0L-3.2L block to
an engine stand!
Make sure that your engine stand head allows full thread engagement
Bolts are ~3.75" long from under
head to beginning of threads
(same thread diameter and pitch as bellhousing bolts)
Set of (4)
Made in USA (OEM Ford)
129.99/pair- INGALLS Adjustable Front Tension Strut Rods
1989-95
Taurus/SHO/Sable
Adjustable length via long threaded ends
Allow for up to +/- 2deg
caster change
Replace your worn/rusted front tension strut rods
Fine-tune your front alignment!
Made in USA
89.99/set- TPR tension strut rod bushing set
1989-95
Taurus/SHO/Sable
Does both ends of all (4) tension strut rods
HD replacement plates/washers are also included (except
at front TSR-to-LCA)
Made in USA
This set sells for $200.+ elsewhere!
189.99/set of 4- INGALLS Adjustable HD Rear control
arms/links
1989-99 Taurus/SHO/Sable
Forged tubular steel with length-adjustable threaded ends
Allow
for up to +/- 2deg camber/toe change
Superior to stock and GM replacement arms/links.
Replace
your weak stamped-steel stock arms and fine-tune your rear alignment!
Made in USA
72.99- Front subframe/crossmember repair kit
(2 required)
1989-95 Taurus/SHO/Sable
HD permanent repair for front TSR-to-subframe/crossmember
mount!
Precision threaded components replace loose/damaged tension strut
rod bushing receiver cup.
Get rid of that front-end clunking and rattling!
Detailed instructions included.
(2) required- one per side
Made in USA
24.99/pair- Moog Adjustable rear arm bushings
1989-95
Taurus/SHO/Sable sedan
Allow up to 2deg camber, 1.5deg toe change
Fine-tune your rear alignment!
Typical installation
consists of one pair per side
Made in USA
249.99/set- Eibach performance springs
1989-95
Taurus/SHO/Sable
1.0" drop front, 0.5" drop rear
Full Set of (4) new springs.
259.99/set- Eibach performance springs
1996-99
Non-SARC Taurus/SHO/Sable
1.4" drop front, 1.3" drop rear
Full Set of (4) new springs.
129.99/set- MOOG/DANA coil springs
1989-95 Taurus/SHO/Sable
sedan
Specify year, model, engine & trans type
Full Set of (4) new springs.
59.99- 1989-95 SHO- NOS Ford- Front Upper Spring Seats w/Bearings
(2)
1989-95 Taurus/SHO/Sable
Includes two new front upper spring seats
with new strut bearings!
Made in USA
Genuine NOS Ford-Motorcraft parts!
49.99- 1989-90 SHO HD Adjustable front strut mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
59.99- 1991-95 SHO HD Adjustable front strut mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
24.99- 1989-95 SHO HD front strut mount
Studs
have 9.8 hardness and extend ~7/8" above the plate
Hardware included
2 required
15.99- 1989-95 SHO premium front strut bearing
2
required
Made in USA or Canada
26.99- 1989-95 SHO HD rear strut mount
Improved
later design!
Studs have 9.8 hardness and extend ~7/8" above the plate
Hardware included
2 required
14.99- 1989-95 MOOG/TRW strut bumper/bellows
Improved
design!
4 required
Made in USA
26.99/set- TPR anti-sway bar bushings
24mm dia.
front, 26mm dia. rear
Fit perfectly in original brackets
Made in USA
28.99/set- TPR anti-sway bar bushings
22mm dia.
front, 26mm dia. rear
Fit perfectly in original brackets
Made in USA
29.99/set- TPR anti-sway bar bushings
20.5mm dia.
front, 26mm dia. rear
Fit perfectly in original brackets
Made in USA
59.99/pair- HD front anti-sway bar endlinks
1989-95
Taurus/SHO/Sable
Improved sealed design
Well-lubricated joints- best available HD composite links
Large hex
at stud base for easy installation and removal.
Made in USA
47.99/pair- MOOG HD front anti-sway bar endlinks
1989-95 Taurus/SHO/Sable
Non-sealed design
HD steel, with grease fittings
Large hex at stud base for easy installation
and removal.
Made in USA or Mexico
65.99/pair- HD front anti-sway bar endlinks
1996-99
Taurus/SHO/Sable
Improved sealed design
Well-lubricated joints- best available HD composite links
Large hex at stud
base for easy installation and removal.
Made in USA
49.99/pair- MOOG HD front anti-sway bar endlinks
1996-99 Taurus/SHO/Sable
Non-sealed design
HD steel, with grease fittings
Large hex at stud base for easy installation
and removal.
Made in USA or Mexico
32.99/pair- TRW HD rear anti-sway bar endlinks
Thicker
center shaft (9/16")
Machined from one-piece hardened steel rod
Studs and self-locking nuts at each end
Performance
polyurethane bushings
Made in USA
26.99/pair- MOOG/TRW HD rear anti-sway bar endlinks- BLUE
Hardened bolt/sleeve design
Blue TPR performance bushings
Made in USA
|
