Please email us if you need additional parts that we haven't listed
here yet!
Be sure to note the year, engine & trans type of your SHO!
If
you need more than 4-5 items, please contact us first
for an itemized invoice with a more accurate combined shipping/handling cost.
Shipping costs listed at checkout
are for 48-state US only! If you are in Alaska, Hawaii or Canada, please email for a shipping quote. If you need Express
or Priority shipping, or you need to use an alternate payment method, please email before
ordering.
We go to great lengths
to order as many parts as we can that are manufactured or remanufactured in USA and Japan!
If you prefer to use
only Ford-Motorcraft parts, we can order all available
parts through Ford at a discount!
24.99- SHO 3.0L-3.2L premium fuel injector seal set Includes: 6- Fuel Injector-to-Rail o-rings 6- Fuel Injector-to-Head
seals 6- Fuel Injector Upper insulators/seals Made in Japan
54.99- SHO 3.0L head gasket (2) Required Made in Japan (OEM, Fel-Pro, Victor)
48.99- SHO 3.2L head gasket (2) Required
Made in Japan (OEM, Fel-Pro)
38.99- SHO 3.0L-3.2L Fel-Pro head bolt set Includes: 16- new Head Bolts
Made in USA or Japan (Fel-Pro, Sealed Power, Victor)
*These are not the commonly
sold single-platinum plugs!
They are specifically designed
for DIS systems that fire spark in BOTH directions.
34.99- Autolite Extreme spark plugs Iridium enhanced .6mm finewire design! Patented Platinum sidewire More focused ignition with virtually no gap
erosion Set of six Made in USA
99.99- SHO 3.0L-3.2L- TAYLOR spark plug wire set- RED 8MM low-resistance Spiro-Wound Stainless-steel conductor Dual-layer 100%
Silicone insulation rated to 600deg F. Double spring-locking spark plug terminals RED wire with black terminal ends/boots Made
in USA
109.99- SHO 3.0L-3.2L- TAYLOR spark plug wire set- BLUE 8MM low-resistance Spiro-Wound Stainless-steel conductor Dual-layer 100%
Silicone insulation rated to 600deg F. Double spring-locking spark plug terminals BLUE wire with black terminal ends/boots Made
in USA
109.99- SHO 3.0L-3.2L- TAYLOR spark plug wire set- BLACK 8MM low-resistance Spiro-Wound Stainless-steel conductor Dual-layer 100% Silicone insulation rated
to 600deg F. Double spring-locking spark plug terminals BLACK wire with black terminal ends/boots Made in USA
159.99- Motorcraft 3.0L spark plug wire set
179.99- Motorcraft 3.2L spark plug wire set
139.99- SHO 3.0L-3.2L DIS Ignition module
Made in USA (Echlin, Standard, Borg-Warner/BWD)
79.99- SHO 3.0L-3.2L ACCEL Super Coil pack Engineered
for faster rise time and longer spark duration. Produces 15% more spark energy for increased performance! Highly specialized
silicone magnetic steel core Optimized windings Brass secondary contacts High temperature epoxy resists shock and
vibration Made in China (unfortunately) but to Accel's standards of course
Drop-in fuel pump upgrade that functions properly with
the stock regulator/return system.
(Can also be used as an upgrade on 1989-95 Taurus/Sable) Includes: New
strainer, tank seal, installation hardware Installation kit and instructions Made in USA by Federal-Mogul
(Carter)
Replacement fuel pump that is designed to function properly with the stock fuel pressure
regulator and return system. (Can also be used as an upgrade on 1989-95 Taurus/Sable 3.0L-3.8L) Includes: New
strainer, tank seal, installation hardware and instructions Made in USA by Airtex.
169.99- 1989-95 SHO Fuel Pump & Sending Unit 1989-95
Taurus SHO with 18.6gal fuel tank Complete new Federal-Mogul fuel pump and new Airtex (USA)sending unit/bracket
assembly!
Includes new tank seal Made in USA
99.99- SHO 3.0L-3.2L- NEW Fuel Pressure Regulator
Corrects fuel pressure control issues Made in USA. (OEM, Standard,
Tomco, Echlin)
49.99- SHO 3.0L NEW Fuel Injector Includes new seals (6)
required- priced individually
69.99- SHO 3.2L NEW Fuel Injector Includes new seals (6)
required- priced individually
24.99- SHO 3.0L-3.2L fuel injector seal set
Includes: 6- Fuel Injector-to-Head o-rings 6- Fuel Injector-to-Head
seals 6- Fuel Injector Upper insulators/seals Made in Japan
29.99- Fuel Tank Straps 1989-95
Taurus/SHO/Sable Set of (2) Made in USA or Canada
14.99- Fuel Tank Strap Bolt Set 1989-95 Taurus/SHO/Sable Set
of (2) Made in USA or Canada
99.99- New Fuel Tank (16 gal) 1989-95 Taurus/Sable Made
in USA or Canada
109.99- New Fuel Tank (18.6 gal) 1989-95 Taurus/SHO/Sable Made
in USA or Canada
2" dual pipes with smooth bends into a single 2.25" collector
Stainless-steel piping and converter cases. Much improved (smoother)
transition into rear converter. Great replacement for your worn-out/rusted original y-pipe! (sold elsewhere as a "high-flow
performance" y-pipe) Made in USA
349.99- 1993 SHO 3.2L ATX Y-Pipe
2" dual pipes into a single 2.25" collector
Stainless-steel piping and converter cases.
Great replacement for your clogged/worn-out/rusted original y-pipe! Made in USA
349.99- 1994-95 SHO 3.2L ATX Y-Pipe
2" dual pipes into a single 2.25" collector
Stainless-steel piping and converter cases.
Great replacement for your clogged/worn-out/rusted original y-pipe! Made in USA
19.99- 1989-95 SHO ATX-MTX Exhaust Manifold Stud set
New exhaust manifold-to-y-pipe studs and nuts Set of (4) Made
in USA
7.99- 1989-95 SHO MTX Y-pipe Flange Bolt/Spring set
New y-pipe flange bolts, nuts, and tension springs.
Made in USA
10.99- 1989-95 SHO MTX Y-pipe Flange Seal
New y-pipe flange seal. Made in USA
7.99- 1993-95 SHO ATX Y-pipe Flange Gasket
New y-pipe flange gasket. Made in USA
319.99- SHO 3.0L MTX Dynomax Exhaust System
Mandrel-bent, high-flow, aluminized steel pipes 2.5"
intermediate pipe into split 2.25" tailpipes 2.5" stainless-steel tips Aluminized Super Turbo mufflers Cat-back
system (no front y-pipe or converters included) Retains original mounting/hanger locations
Resonator pipe section has clearance for "Rod" shifter 1992-95
SHO 3.0L MTX
(Can also be used on 1989-91 SHO 3.0L MTX w/minor fitment changes.)
Made in USA
319.99- SHO 3.2L ATX Dynomax Exhaust System
Mandrel-bent, high-flow, aluminized steel pipes 2.5"
intermediate pipe into split 2.25" tailpipes 2.5" stainless-steel tips Aluminized Super Turbo mufflers Cat-back
system (no front y-pipe, converters, or flex-pipe incl.) Retains original mounting/hanger locations 1993-95 SHO
3.2L ATX
Made in USA
89.99- 1989-95 SHO Dynomax Muffler- Left
Aluminized, high-flow Super Turbo muffler T-304 stainless steel
tip! 2.25" ID offset inlet and 2.5" ID offset outlet 30" overall length; 16" case length 4.25"
high and 9.75" wide oval Made in USA
89.99- 1989-95 SHO Dynomax Muffler- Right
Aluminized, high-flow Super Turbo muffler T-304 stainless-steel
tip! 2.25" ID offset inlet and 2.5" ID offset outlet 26.5" overall length; 16" case length 4.25"
high and 9.75" wide oval Made in USA
74.99- 1989-95 SHO MTX Resonator Pipe
Aluminized, high-flow, mandrel-bent replacement resonator pipe Has
clearance for Rod Shifter setup Pipe and outlet are 2.5" (slightly larger than stock) Made in USA
69.99- 1993-95 SHO ATX Resonator Pipe
Aluminized, high-flow replacement resonator pipe
Made in USA
44.99- SHO 3.0L-3.2L exhaust manifold gasket set- Includes: 2- Exhaust Manifold-to-Head Gaskets Made in Japan
59.99- SHO 3.0L-3.2L EGR Valve Exhaust Gas Recirculation
Valve
Includes new stock-type gasket 1993-95 SHO 3.2L Made in USA
2.49- SHO 3.0L-3.2L EGR valve gasket- stock
Made in USA or Japan
12.99- SHO 3.0L-3.2L EGR valve gasket with SS screen This EGR gasket has an integrated stainless-steel carbon filter screen
to catch larger carbon particles.
As heat increases at the screen, the carbon particles are
broken down into smaller, non-clogging particles.
Made in USA
COOLING SYSTEM: by FORD-MOTORCRAFT, AIRTEX, VISTEON, and others
32.99- SHO 3.0L-3.2L Motorcraft T-stat & seal 192 deg
Made in Japan
15.99- SHO 3.0L-3.2L Premium HD 180 deg T-stat & seal Has "jiggle valve" Heavy-Duty, similar to Motorcraft
14.99- SHO 3.0L-3.2L Premium HD 192 deg T-stat & seal Has
"jiggle valve" Heavy-Duty, similar to Motorcraft
49.99- SHO 3.0L remanufactured water pump Fully remanufactured
in USA by Cardone or Fenco. Includes pump-to-rear housing gasket +$10. refundable core charge
159.99- SHO 3.0L new water pump Brand New Includes rear
housing, gaskets and o-rings No core charge
Made in USA or Japan (Aisin, Bosch)
49.99- SHO 3.2L remanufactured water pump Fully remanufactured
in USA by Cardone or Fenco. Includes pump-to-rear housing gasket +$10. refundable core charge
159.99- SHO 3.2L new water pump Brand New Includes rear
housing, gaskets and o-rings No core charge
Made in USA or Japan (Aisin, Bosch)
139.99- 1989-95 SHO DUAL-CORE Premium Performance Radiator
Increases cooling system capacity for HP/track vehicles.
Adds ~1" (one row) to core thickness, so expect some modification to fan/shroud and coolant reservoir
mounting, etc. for clearance. Subframe can also be adjusted backward slightly, and adjustable front tension strut rods
used if necessary to retain caster setting.
Made in USA or Canada
119.99- 1989-93 SHO 3.0L Radiator Stock replacement Made
in USA or Canada
119.99- 1994-95 SHO 3.0L Radiator Stock replacement Made
in USA or Canada
119.99- 1993-95 SHO 3.2L Radiator Stock replacement Made
in USA or Canada
30.99- SHO 3.0L Cloyes
Timing Belt Top quality new timing belt!
Marked for SHO 3.0L crankshaft timing gear position.
Made in Germany or USA
30.99- SHO 3.2L Cloyes Timing Belt Top quality new timing belt!
Marked for SHO 3.2L crankshaft timing gear position.
Made in Germany or USA
22.99- SHO 3.0L Dayco Timing Belt Marked
for SHO 3.0L crankshaft timing gear position. Made in Italy or USA
22.99- SHO 3.2L Dayco Timing Belt
Marked for SHO 3.2L crankshaft timing gear position. Made in Italy or USA
59.99- SHO 3.0L SKF Timing Belt Tensioner
New timing belt tensioner pulley/bearing/hub assembly
Made in Japan
39.99- 3.2L Timing Belt Tensioning Tools- Genuine
Ford-Rotunda special service tools! Includes: Timing
Belt Tensioning Tool Torque Wrench Adapter Made in USA
17.99- 1989-93 SHO 3.0L Dayco Premium Accessory Belt- AC
and ALT
Top quality AC compressor and Alternator belt! 1989-93 SHO 3.0L
18.99- 1994-95 SHO 3.0L Dayco Premium Accessory Belt- AC
and ALT
Top quality AC compressor and Alternator belt! 1994-95 SHO 3.0L
Located on the upper rear driver's side of the engine block.
A failed oil pressure sending unit is a very common cause of a rear engine oil
leak, usually dripping onto the y-pipe and burning off...sometimes causing a fire.
Made in USA
49.99- Taurus/SHO/Sable front ABS sensor- Left 1990-95
Taurus/SHO/Sable w/ABS
Made in USA
49.99- Taurus/SHO/Sable front ABS sensor- Right 1990-95
Taurus/SHO/Sable w/ABS
Made in USA
39.99- Taurus/SHO/Sable rear ABS sensor- Left 1990-95
Taurus/SHO/Sable w/ABS
Made in USA
39.99- Taurus/SHO/Sable rear ABS sensor- Right 1990-95
Taurus/SHO/Sable w/ABS
30.99- SHO 3.0L Cloyes Timing Belt Top quality
new timing belt!
Marked for SHO 3.0L crankshaft timing gear position
Made in Germany, USA.
30.99- SHO 3.2L Cloyes Timing Belt Top quality new timing belt!
Marked for SHO 3.2L crankshaft timing gear position
Made in Germany, USA.
22.99- SHO 3.0L Dayco Timing Belt Marked
for SHO 3.0L crankshaft timing gear position. Made in Italy or USA
22.99- SHO 3.2L Dayco Timing Belt Marked for
SHO 3.2L crankshaft timing gear position. Made in Italy or USA
58.99- SHO 3.0L SKF Timing Belt Tensioner
New timing belt tensioner pulley/bearing/hub assembly
Made in Japan
39.99- 3.2L Timing Belt Tensioning Tools- Genuine Ford-Rotunda
special service tools! Includes: Timing Belt Tensioning Tool Torque
Wrench Adapter Made in USA
16.99- 1989-93 SHO 3.0L Dayco Premium Accessory Belt- AC
and ALT
Top quality AC compressor and Alternator belt! 1989-93 SHO 3.0L
17.99- 1994-95 SHO 3.0L Dayco Premium Accessory Belt- AC
and ALT
Top quality AC compressor and Alternator belt! 1994-95 SHO 3.0L
Top quality Water pump and Power Steering pump belt! 1989-95 SHO
3.0L
29.99- 1993-95 SHO 3.2L Dayco Premium Serpentine Accessory
Belt
Top quality serpentine accessory belt! 1993-95 SHO 3.2L
79.99- 3.0L-3.2L Valve Adjustment Tools- Genuine Ford-Rotunda
special service tools! (NOT unlicensed copies) Discontinued and quickly becoming more difficult to find. Includes: Valve
Tappet Compressor Valve Tappet Holder Made in USA
We have brand new and good used valve shims available!
3.99- SHO 3.0L-3.2L Premium Valve Guide- Bronze Manganese-Bronze
alloy More durable than any other available bronze valve guides Highest heat transfer rate 24 required Made in
USA
38.99- SHO 3.0L-3.2L head bolt set Includes: 16- new Head Bolts
Made in USA or Japan
Fel-pro, Sealed Power, Victor
19.99- SHO 3.0L-3.2L Brass freeze/expansion plug set
Solid brass construction
Made in USA
9.99- SHO 3.0L-3.2L Steel freeze/expansion plug set
49.99- SHO 3.0L remanufactured water pump Fully remanufactured, with new bearing and seal Includes pump-to-rear housing gasket +$12. refundable core
charge
Remanufactured in USA
159.99- SHO 3.0L new water pump Brand New Includes
rear housing, gaskets and o-rings No core charge
Made in USA or Japan
59.99- SHO 3.2L remanufactured water pump Fully
remanufactured, with new bearing and seal Includes pump-to-rear housing gasket +$14. refundable core charge
Remanufactured in USA
139.99- SHO 3.2L new water pump Brand New Includes
rear housing, gaskets and o-rings No core charge
Made in USA or Japan
The water pump should be replaced as part of
every 60K/100K service, and/or as part of any front engine service. A leaking water pump can sometimes cause ignition
system problems by leaking onto the crankshaft position sensor below it.
Be sure to thoroughly flush your cooling
system, because dirt/debris (such as from a failed pump) can cause premature failure in your new pump or other problems in
the cooling system. (Drain the radiator and remove plugs at front and rear of lower block, just above oil
pan rail and flush until water runs clear)
Never use 100% water as coolant...even in warm climates use at least 25% antifreeze
to properly lubricate the water pump (and/or use a specific water pump lubricant).
Always use distilled water (not tap water) mixed with your antifreeze.
Drop-in replacement that functions perfectly with the stock
regulator/return system.
Superior rotary-vane design.
(Can also be used as an upgrade on 1989-95 Taurus/Sable) Includes: New
strainer, tank seal, installation hardware and instructions Made in USA
169.99- 1989-95 SHO Fuel Pump & Sending Unit 1989-95
Taurus SHO with 18.6gal fuel tank Complete new fuel pump and sending unit/bracket assembly New Ford/Airttex
sending unit with new Federal-Mogul performance fuel pump installed!
Includes new tank seal Made in USA
119.99- 3.0L-3.2L Power Steering Pump Fully
remanufactured in USA! +$35. refundable core charge
ENGINE BEARINGS: Standard size will be shipped unless you specify otherwise
42.99-
3.0L-3.2L Clevite rod bearing set STD, .25mm, .50mm, .75mm under
Made in USA
64.99- 3.0L-3.2L Clevite rod bearing kit STD, .25mm, .50mm,
.75mm under Includes: Clevite rod bearing set Fel-Pro oil pan seal set with RTV silicone sealant (for pan
rails) Oil pump pickup tube gasket Plastigauge
Seals made in Japan
Bearings made in USA
79.99- 3.0L-3.2L Clevite main bearing set STD, .25mm, .50mm,
and .75mm under. (.50mm and .75mm under have been discontinued, but we still have a few sets available.) Main
bearings only- no thrust washers
Made in USA
59.99- 3.4L Clevite rod bearing set STD, .25mm, .50mm, .75mm
under
Made in USA
134.99- 3.4L Clevite main bearing set STD, .25mm, .50mm, .75mm
under
Made in USA
49.99- 3.4L Clevite thrust bearing set
Made in USA
PISTON RINGS: Standard size will be shipped unless you specify otherwise
129.99-
Perfect Circle 3.0L premium rings Top compression rings are Chrome-faced STD, +.020, +.030", +.040"
Made in USA
119.99- Hastings 3.0L premium piston rings Top compression
rings are Chrome-faced STD, +.020", +.030", +.040"
Made in USA
119.99- Hastings 3.2L premium piston rings Top compression
rings are Chrome-faced STD, +.020", +.040"
Made in USA
174.99- Hastings 3.4L premium piston rings Top compression
rings are Chrome-faced STD, +.010", +.020", +.030", +.040"
Made in USA
289.99- Total Seal 3.0L Gapless piston rings Top compression
rings are gapless!
Improved cylinder sealing,
More efficient cylinder filling,
Less compression loss.
Cylinder wall prep: Ra 14-20 at 45deg. cross.
Break-in: non-synthetic 5W-30 oil for 3,000mi.
STD, +.020", +.030", +.040"
Made in USA
289.99- Total Seal 3.2L Gapless piston rings Top compression
rings are gapless!
Improved cylinder sealing,
More efficient cylinder filling,
Less compresson loss.
Cylinder wall prep: Ra 14-20 at 45deg cross.
Break-in: non-synthetic 5W-30 oil for 3,000mi. STD, +.020",
+.040"
Made in USA
379.99- Total Seal 3.4L Gapless piston rings Top compression
rings are gapless!
Improved cylinder sealing,
More efficient cylinder filling,
Less compression loss.
Cylinder wall prep: Ra 14-20 at 45deg. cross.
Break-in: non-synthetic 5W-30 oil for 3,000mi. STD, +.020",
+.030", +.040"
179.99- NEW Ford 3.0L Front Engine Mount Stock
OEM Ford replacement; 1989-95 SHO 3.0L MTX Made in USA
115.99- NEW Ford 3.0L Rear Engine Mount Stock OEM Ford replacement;
1989-95 SHO 3.0L MTX Made in USA
59.99- NEW 3.0L Rear Engine Mount 1989-95 SHO 3.0L MTX Aftermarket
49.99- NEW SHO 3.0L MTX- Manual Transaxle Mount 1989-95 SHO
3.0L MTX Aftermarket
199.99- NEW Reinforced Ford 3.0L Front Engine Mount HD replacement;
1989-95 SHO 3.0L MTX
(This is a NEW Ford mount that has been modified to limit separation, NOT a
remanufactured used part like some others) Made in USA
129.99- NEW Reinforced Ford 3.0L Rear Engine Mount HD replacement;
1989-95 SHO 3.0L MTX
(This is a NEW Ford mount that has been modified to limit separation, NOT a
remanufactured used part like some others) Made in USA
59.99- NEW 3.2L ATX Front Engine Mount 1993-95
SHO 3.2L ATX Stock-type Hydraulic front engine mount Aftermarket
69.99- NEW 3.2L ATX Rear Engine Mount 1993-95
SHO 3.2L ATX Stock-type Hydraulic rear engine mount Aftermarket
29.99- NEW 3.2L ATX Automatic Transaxle Mount 1993-95
SHO 3.2L ATX Stock-type Hydraulic automatic transaxle mount Aftermarket
299.99- 1989-95 Ford HD subframe mount set Greatly
improved design!
Genuine Ford OEM parts.
Far superior to "Police" subframe mounts,
without the noise-vibration-harshness of solid aluminum mounts.
Set of (4)
18.99- 1989-95 FORD subframe mount recall kit
Genuine Ford OEM parts.
Includes:
(2) subframe bolts (2) HD improved captive nuts (2) HD plate
washers (not used with our HD bushings above) (2) hole plugs (to plug top access holes for replacing captive nuts) Detailed
instructions Designed for rear subframe mount repair, but hardware can be used at front mounts also
11.99- 1989-95 Ford subframe mount bolts Galvanized
steel; genuine Ford OEM parts. Metric 10.9 hardness Also great for mounting 3.0L-3.2L block to an engine stand! Make
sure that your engine stand head allows full thread engagement Bolts are ~3.75" long from under head to beginning of threads (same
thread diameter and pitch as bellhousing bolts)
69.99- MOOG Front Left Lower Control Arm 1989-95 Taurus/SHO/Sable Heavy-Duty
SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95 Taurus/Sable. Includes new
ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut, and new rear tension strut rod nut. Integral ball
joint has angled grease fitting. New OE-type pressed-in LCA-to-subframe and LCA-to-tension strut rod bushings.
Made in USA
Never install the lighter duty Taurus/Sable LCA on your
SHO!
(many parts store listings are incorrect) We'll
install the ball joint boots and grease fittings for you!
69.99- MOOG Front Right Lower Control Arm 1989-95
Taurus/SHO/Sable Heavy-Duty SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95
Taurus/Sable. Includes new ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut, and new rear tension
strut rod nut. Integral ball joint has angled grease fitting. New OE-type pressed-in LCA-to-subframe and LCA-to-tension
strut rod bushings.
Made in USA
Never install the lighter duty Taurus/Sable LCA on your SHO!
(many parts store listings are incorrect) We'll install the ball joint boots and grease
fittings for you!
299.99- 1989-95 Ford HD subframe mount set Greatly
improved design!
Genuine Ford OEM parts.
Far superior to "Police" subframe mounts,
without the noise-vibration-harshness of solid aluminum mounts.
Set of (4)
Made in USA (OEM Ford)
18.99- 1989-95 FORD subframe mount recall kit
Genuine Ford OEM parts.
Includes:
(2) subframe bolts (2) HD improved captive nuts (2) HD plate
washers (not used with our HD bushings above) (2) hole plugs (to plug top access holes for replacing captive nuts) Detailed
instructions Designed for rear subframe mount repair, but hardware can be used at front mounts also
Made in USA (OEM Ford)
11.99- 1989-95 subframe mount bolts Galvanized
steel, genuine Ford OEM parts. Metric 10.9 hardness Also great for mounting 3.0L-3.2L block to an engine stand! Make
sure that your engine stand head allows full thread engagement Bolts are ~3.75" long from under head to beginning of threads (same
thread diameter and pitch as bellhousing bolts)
Set of (4)
Made in USA (OEM Ford)
129.99/pair- INGALLS Adjustable Front Tension Strut Rods 1989-95
Taurus/SHO/Sable
Adjustable length via long threaded ends Allow for up to +/- 2deg caster change
Replace your worn/rusted front tension strut rods Fine-tune your front alignment!
Made in USA
189.99/set of 4- INGALLS Adjustable HD Rear control
arms/links
1989-99 Taurus/SHO/Sable
Forged tubular steel with length-adjustable threaded ends Allow
for up to +/- 2deg camber/toe change
Superior to stock and GM replacement arms/links. Replace
your weak stamped-steel stock arms and fine-tune your rear alignment!
Made in USA
89.99/set- TPR tension strut rod bushing set 1989-95 Taurus/SHO/Sable
Does both ends of all (4) tension strut rods HD replacement plates/washers are also included for all locations except
front TSR-to-LCA Made in USA This set sells for $200.+ elsewhere!
72.99- Front MOOG subframe/crossmember repair kit
(2 required)
1989-95 Taurus/SHO/Sable HD permanent repair for front TSR-to-subframe/crossmember
mount!
24.99/pair- MOOG Adjustable rear arm bushings 1989-95 Taurus/SHO/Sable
sedan Allow up to 2deg camber, 1.5deg toe change Fine-tune your rear alignment!
Typical installation consists of one pair per side
Made in USA
25.99- TRW Heavy-Duty Inner tie rod 1989-95 Taurus/SHO/Sable
Heavy-Duty, Low-Friction design! Includes new jam nut
Made in USA
18.79/each- MOOG Greaseable Outer Tie Rod End 1989-95 Taurus/SHO/Sable with grease fitting Includes
new castle nut and cotter pin
Made in USA
25.99/each- TRW Sealed Outer Tie Rod End 1989-95
Taurus/SHO/Sable
Improved Low-Friction design! sealed (non-greaseable) Includes
new castle nut and cotter pin
Made in USA
14.99/each- DANA Standard Greaseable Outer Tie Rod End 1989-95 Taurus/SHO/Sable
with grease fitting Includes new castle nut and cotter pin
Made in USA or Mexico
24.99/each- DANA Heavy-Duty Greaseable Outer Tie Rod
End 1989-95 Taurus/SHO/Sable
Heavy-Duty, with grease fitting Includes new castle nut and cotter
pin
Made in USA
89.99- 1993-1995 SHO 3.0L-3.2L Power Steering Rack- VAPS Fully
remanufactured in USA! 1993-95 Taurus/SHO/Sable withVariable Assist Power Steering +$79.
refundable core charge
159.99- 1989-1992 SHO 3.0L-3.2L Power Steering Rack- non-VAPS Fully
remanufactured in USA! 1989-92 SHO without Variable Assist Power Steering +$79. refundable core charge
74.99- 1989-1995 Taurus/Sable Power Steering Rack- non-VAPS Fully
remanufactured in USA! 1989-95 Taurus/Sable without Variable Assist Power Steering +$35. refundable
core charge
99.99- 3.0L-3.2L Power Steering Pump Fully remanufactured
in USA! +$25. refundable core charge
129.99/set- MOOG/DANA coil springs 1989-95 Taurus/SHO/Sable
sedan Specify year, model, engine & trans type Full Set of (4) new springs.
Made in USA
59.99/pair- HD front anti-sway bar endlinks 1989-95 Taurus/SHO/Sable
Improved sealed design HD composite, well-lubricated joints Large hex at stud base for easy installation and removal.
Made in USA
49.99/pair- MOOG HD front anti-sway bar endlinks 1989-95 Taurus/SHO/Sable
Non-sealed design HD steel, with grease fittings Large hex at stud base for easy installation and removal.
Made in USA or Mexico
32.99/pair- TRW HD rear anti-sway bar endlinks Thicker center
shaft (9/16") Machined from one-piece hardened rod Studs and self-locking nuts at each end Performance TPR bushings
Made in USA
24.99/pair- MOOG/TRW HD rear anti-sway bar endlinks- BLUE Hardened bolt/sleeve design Blue TPR performance bushings Made in USA
26.99/set- TPR anti-sway bar bushings 24mm dia. front, 26mm
dia. rear Fit perfectly in original brackets Made in USA
28.99/set- TPR anti-sway bar bushings 22mm dia. front, 26mm
dia. rear Fit perfectly in original brackets Made in USA
29.99/set- TPR anti-sway bar bushings 20.5mm dia. front, 26mm
dia. rear Fit perfectly in original brackets Made in USA
49.99- 1989-90 SHO Ingalls/MOOG HD Adjustable front strut
mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side. 2 required
Made in USA
59.99- 1991-95 SHO Ingalls/MOOG HD Adjustable front strut
mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side. 2 required
Made in USA
26.99- 1989-95 SHO HD front strut mount Studs
have 9.8 hardness and extend ~7/8" above the plate Hardware included 2 required
15.99- 1989-95 SHO HD front strut bearing 2 required
Made in USA
26.99- 1989-95 SHO HD rear strut mount Improved
later design! Studs have 9.8 hardness and extend ~7/8" above the plate Hardware included
2 required
14.99- 1989-95 SHO MOOG or TRW HD strut bumper/bellows kit Improved
design!