|
Upgrade
your steering system!
For better, safer, predictable handling
179.99- 1989-1992 SHO Power Steering Rack- non-VAPS- GENUINE FORD
Fully
remanufactured in USA by Ford!
1989-92 Taurus SHO without Variable Assist Power Steering
This
is the SHO-specific rack- not a standard non-VAPS Taurus/Sable rack.
(1)
currently available
NO CORE
CHARGE!
89.99- 1993-1995 SHO Power Steering Rack- VAPS
Fully
remanufactured in USA!
1993-95 Taurus SHO with Variable Assist Power Steering
Also
fits 1990-95 Taurus/Sable with Variable Assit Power Steering
VAPS 3-port.
NO reman VAPS rack will include
VAPS actuator/motor unit- transfer existing.
+$49. refundable core charge
129.99- 1989-1992 SHO Power Steering Rack- non-VAPS
Fully
remanufactured in USA!
1989-92 Taurus SHO without Variable Assist Power Steering
This is
the SHO-specific non-VAPS rack- not a standard Taurus/Sable rack.
+$45. refundable core charge
74.99- 1989-1995 Taurus/Sable Power Steering Rack- non-VAPS
Fully
remanufactured in USA!
1989-95 Taurus/Sable without Variable Assist Power Steering
+$35. refundable
core charge
18.79/each- MOOG Greaseable Outer Tie Rod End
1989-95 Taurus/SHO/Sable
with grease fitting
Includes
new castle nut and cotter pin
Made in USA
25.99/each- TRW Sealed Outer Tie Rod End
1989-95
Taurus/SHO/Sable
Improved Low-Friction design!
sealed (non-greaseable)
Includes
new castle nut and cotter pin
Made in USA
24.99/each- DANA Heavy-Duty Greaseable Outer Tie Rod
End
1989-95 Taurus/SHO/Sable
Heavy-Duty, with grease fitting
Includes new castle nut and cotter
pin
Made in USA
14.99/each- DANA Standard Greaseable Outer Tie Rod End
1989-95 Taurus/SHO/Sable
with grease fitting
Includes new castle nut and cotter pin
Made in USA or Mexico
25.99/each- TRW Heavy-Duty Inner tie rod
1989-95
Taurus/SHO/Sable
Heavy-Duty, Low-Friction design!
Includes new jam nut
Made in USA
99.99- 3.0L-3.2L Power Steering Pump
Fully remanufactured
in USA!
+$25. refundable core charge
69.99- MOOG Front Left Lower Control Arm
1989-95
Taurus/SHO/Sable
Heavy-Duty SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95
Taurus/Sable.
Includes new ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut,
and new rear tension
strut rod nut.
Integral ball joint has angled grease fitting.
New OE-type pressed-in LCA-to-subframe and LCA-to-tension
strut rod bushings.
Made in USA
Never install the lighter-duty Taurus/Sable LCAs on your SHO!
(Some parts store listings are incorrect)
We'll install
the ball joint boots and grease fittings for you!
69.99- MOOG Front Right Lower Control Arm
1989-95
Taurus/SHO/Sable
Heavy-Duty SHO-specific part that can also be installed as a safety/performance upgrade to any 1989-95
Taurus/Sable.
Includes new ball joint pinch bolt & nut, new LCA-to-subframe bolt & nut,
and new rear tension
strut rod nut.
Integral ball joint has angled grease fitting.
New OE-type pressed-in LCA-to-subframe and LCA-to-tension
strut rod bushings.
Made in USA
Never install the lighter-duty Taurus/Sable LCAs on your SHO!
(Some parts store listings are incorrect)
We'll install
the ball joint boots and grease fittings for you!
59.99- 1989-95 SHO- Front Upper Spring Seats w/Bearings (2)
1989-95 Taurus/SHO/Sable
Includes two new front upper spring seats
with new strut bearings!
Made in USA
15.99- 1989-95 SHO premium front strut bearing
2
required
Made in USA or Canada
49.99- 1989-90 SHO HD Adjustable front strut mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
49.99- 1991-95 SHO HD Adjustable front strut mount
Adjustable eccentric center!
Allow for up to +/- 1.25deg caster/camber change per side.
2 required
Made
in USA
24.99- 1989-95 SHO HD front strut mount
Studs
have 9.8 hardness and extend ~7/8" above the plate
Hardware included
2 required
|
